Masana'antar Custom Photo Pendant | Far ɗari 999 da Titanium Steel na Farfasa

Masana’antar Malkafin Wuya na Hoto na Musamman

Yichi Custom Products masana’antar custom photo pendant ce a Sin da ke mayar da hoton hoto, danniyar yatsa, suna ko tambarin kasuwancinku ya koma farantin ƙarfe da ake sawa a wuya. Ba a buga hoton a saman ƙarfen ba — ana zana shi a matsayin zanon 3D mai zurfi a cikin far ɗari na 999 ko ƙarfen titanium, ana sheka shi da hannu, kuma ana barin hilinan su baƙaƙe da halitta domin bayanan su kasance bayyana ko da daga nisan mikin hannu.

Muna da shekaru 12 a fagen sufurin ƙarfe, muna samarwa ga masu alhakin brands na kayan ado da kyauta, masu sayar da abubuwan tunawa na dabbobin gida, shagunan kyauta na musamman, ‘yan kasuwa na Etsy, Amazon da Shopify, kamfanonin abun tunawa da biki, da ‘yan kasuwa na farfasa. Ku odar abu guda ɗaya ko ku shirya jerin kayayyakin sayarwa — MOQ 1 yawa ne, samfurin yana ɗaukar kwanaki 1–3, masarafa kuma tana ɗaukar kwanaki 2–10.

Salon Pendant a Takaice

Fasahar zanon 3D iyalai ne, ba samfurin guda ɗaya ba. Irin wannan zane yana gudana ta cikin:

• Faranti mai zagaye — faranti mai zagaye na shelu biyu a kimanin 2 cm (kimanin 6 ± 0.5 g), da faranti mai zagaye na zanon 3D a kimanin 2 cm (kimanin 5.5 ± 0.5 g).
• Pendant na siffar kai — an yanke shi zuwa layin waje na jigo. Nau’in malkafin wuya yana zuwa a kimanin 4 ± 0.5 g, nau’in murna yana zuwa a 16 + 3 cm da kimanin 3.5 ± 0.5 g, akuma nau’in katun mabuɗi a kan gajeren sarkar far ɗari da zoben mabuɗi na ƙarfe marar ɓarna a kimanin 6 ± 0.5 g.
• Bambu — bambon hoton kai a kan zobe mai ƙanƙanta na zagaye ko zobe mai faɗi karami da kankanin kai na kimanin 1–1.2 cm, kai ɗaya, biyu ko uku, zobe a buɗe ko a rufe; da kuma bambon mai kai da yawa a kan zobe mai faɗi, kai uku ne a ka’ida.
• Murna — nau’in a buɗe, faɗin 5 mm a hannun 16 cm, da zane na cikakken jiki, rabin jiki ko kai; murna mai zane biyu a 5 mm; da murna mai kai da yawa a 7 mm wadda ke ɗaukar kai 1–8 a jikin guda ɗaya.
• ‘Yan kunne da burosh — ‘yan kunne na hoton kai da ake sayarwa a matsayin biyu a kimanin 1 cm, da burosh na faranti mai zagaye a kimanin 1.7 cm a siffar zagaye ko siffar jiki tare da ƙarfe da aka liƙa ko binne mai siffar zura.

Ku gaya mana irin abin da kuke cikin zuciya za mu tabbatar da wane jiki ya fi dacewa da zanku — aiko da ƙayyadaddun nan.

Yadda Hoto Ke Komawa Zanon 3D Mai Zurfi

Gajeren alamar lasa tana kan saman ƙarfen kacal. Zanon mu na 3D kuma yana shiga cikin ƙarfen. Zurfi, shelun da suka biye da juna, lanƙwasassun saman ƙarfe da wasan haske da inuwa duk ana gina su a cikin farantin, shi ya sa fuska, lahaun gashin dabba ko layukan danniyar yatsa suke riƙe siffarsu maimakon su kume toka silweta.

Ana zana rubutu, zane-zane da hotuna cikin zurfi domin ƙarfi da jure zamewa. Baƙaƙen wuraren ba fenti ba ne, ba rufi ba ne — baƙaƙen halitta na hannu gaba ɗaya ne, wani tsuwar far ɗari da ke fitowa a cikin hilinan kuma barin saman da ke tashi ya ci gaba da haske. Baƙaƙe zaɓi ne, kuma shi ne a ka’ida.

Bangarai biyu na iya ɗauke da abu, don haka custom photo pendant da aka zana suna a gaba zai iya ɗauke da kwanan wata, danniyar yatsa ko gajeren saƙo a baya, kuma za a iya sanya abun ta kowane ɓangare.

Kana son ganin yadda hotonka zai fito idan an zana shi? Ku nema kyauta mock-up.

Far ɗari na 999 ko Titanium Steel — da Wace Sarka Ta Dace

Far ɗari na 999 shine kayan da aka saba zaɓa. Shine zaɓin mai laushi da mai haske, kuma wanda ke riƙe ɗimbin bayanan hoto da danniyar yatsa mafi kyau, ana ƙare shi da shekar hannu don samun santsin sama mai kyau.

Titanium steel shine zaɓin mai ƙarfi, kuma launinsa baya kushewa, baya haifar da hassasiya, baya lankwasuwa, yana jure ruwa kuma baya ɓarna. Faranti na titanium steel suna zuwa da ƙaralen sheka ko na bush, tare da na sheka a matsayin na ka’ida. Ku yi amfani da titanium steel don manyan faranti, sanya yau da kullum da kayayyakin da ake sawa kusa da fatar jiki.

Sarkoƙi suna bin pendant. Sarkoƙin far ɗari na S925 suna zuwa a 1.5 mm × 45 cm, 1.5 mm × 50 cm da 1.5 mm × 60 cm; igiyar fata ta baki ta 2 mm za a iya yanke ta zuwa tsawon da ake so. Dokar daidaitawa tana riƙe daidaito — pendant na 13–19 mm yana ɗaukar sarkar titanium steel ta 2 mm × 45 cm, pendant na 22–25 mm kuma yana ɗaukar sarkar 3 mm × 50 cm. Akwai salo goma na sarko: igiyar fata ta baki, sarkar luuluu mai murabba’i, sarkar da aka yanke ta kusurwa, sarkar luuluu, sarkar ƙwallaye, sarkar ƙashi/keel, sarkar O, sarkar akwati, sarkar tannuwa da mai sheka ta bangarai biyu.

Ba ku da tabacin wane haɗi ya dace da jerinku? Ku tambaye mu mu ƙayyade shi.

Girma, Nauyi da Abin Da Ya Dace

Faranti na far ɗari suna tafiya daga 13–25 mm a kauri na 1.5 mm, saitin faranti mai zagaye na zanon 3D kuma yana zuwa a 25 mm, 20 mm da 15 mm a kauri na 1.6 mm. Nauyin pendant yana faɗuwa tsakanin kimanin 2 g da 8 g dangane da girma.

Faranti na titanium steel sun fi girma kuma ana auna su da santimita: babba a W 2.8 cm × H 5.0 cm (kimanin 18 g), matsakaici a W 2.5 cm × H 4.5 cm (kimanin 15 g) da ƙarami a W 2.2 cm × H 3.6 cm (kimanin 10 g), duk a kauri na 2 mm.

Zaɓuɓɓukan Sufurawa: Salon Hoto, Haruffa, Danniyar Yatsa da Tsari

Duk abin da ke kan farantin ku ne ke yanke shawara:

• Kayan aiki — far ɗari na 999 ko titanium steel.
• Zane — kyauta zanon lasa na kowane rubutu, zane ko hoto, ana aiwatar da shi a matsayin zanon 3D.
• Rubutu — Sinanci, Turanci, lambobi da alamu, a kowane font. Launi, font da girman font duk zaɓi ne.
• Salon hoto — na gaske, na zannen hannu ko na anime Q-version.
• Alamu da zane-zane — danniyar yatsa, zane-zane, dabbobi 12 na shekarar Sin, kungiyyoyin taurari 12, tambarori da ƙananan kayan ado.
• Tsari — kwance A ko B, a tsaye A, B ko C.
• Bangarai — sufurawa na bangare ɗaya ko bangarai biyu.
• Sarko — kowane ɗayan salo goma, a far ɗari ko igiyar fata.
• Launin rufi — na ka’ida shine launin halittar ƙarfen; ku gaya mana launin da kuke cikin zuciya za mu tabbatar da abin da tsarin ya yarda.
• Adanawa — akwatin ƙarfe mai zagaye, jakar kyauta ta takarda, ko jakiyar velvet tare da itacen shekar far ɗari, da ƙara rubutu a katin sannu idan an roƙa.

Matakan amfani na yau da kullum su ne tunabarin hoton dabba, hotunan jariri, kayayyakin ma’aurata da cika shekara, abubuwan tunawa da kyauta na musamman. Ana iya gina manyan odar malkafin da aka keɓe ga ‘yan kasuwa masu sayarwa a kusa da mock-up guda ɗaya da aka tabbatar sannan a maimaita shi ta girma da salon sarko daban-daban. Aiko da zanku don kimantawa.

Kula da Far ɗari: Sheka, Tsaftacewa da Gyara

Far ɗari ƙarfe ne mai rai, kuma yana da sauƙin riƙe shi mai haske. Ku goge abun da thawakar sheka ko itacen shekar da aka samar domin cire tsuwa daga saman da ke tashi yayin da zanon cikin zurfi yake ci gaba da baƙi bayyane.

Muna kuma tsaya bayan abun da aka tura mu da sabis na tsaftacewa da sheka kyauta, da gyaran ƙananan tsagewuwa, ba tare da iyakar lokaci ba. Ku mayar da shi duk lokacin da ya buƙaci kulawa.

Domin rage saurin baƙaƙen halitta, ku riƙe far ɗari nesa da ramomin ruwan zafi, bleach da sinadaran da suka ɗauke da sulfur, kuma adana shi a bushe kuma a rufe lokacin da ba a sanya shi ba.

Kuna da tambayoyi game da kulawa da abu da kuke mallaka tuni? Ku yi magana da ƙungiyarmu.

Tsarin Odar: Daga Fayil ɗin Hoto zuwa Ƙararadden Pendant

1. Aiko da kayanku — hoton, scan ɗin danniyar yatsa, suna, tambari ko zane, da kuma salon, girma, kayan aiki da sarkar da kuke so.
2. Tabbatar da mock-up ɗin kyauta — muna ƙera tsarin da farko kuma muna aikawa da shi domin rattaba hannuku kafin a zana wani abu.
3. Samfurin — lokacin samfurin kwanaki 1–3 ne, domin ku riƙe zanon da ƙarshe a cikin mukunku.
4. Masarafa — lokacin masarafa kwanaki 2–10 ne bayan tabbatarwa, tare da amfani da irin wannan kayan aiki ga odar maimaituwa.
5. Adanawa da aika — akwatin ƙarfe mai zagaye, jakar kyauta ta takarda ko jakiyar velvet tare da itacen sheka, da rubutu a katin sannu idan an roƙa.

MOQ 1 yawa ne, don haka za a iya odar malkafin tunawa na ɗaya na ma’aurata da danniyar yatsa daidai kamar yadda ake odar farfasa. Karanta game da sufurin ƙarfe na musamman, ko ku tambaye mu game da masana’antarmu kafin ku ba mu ƙayyadaddun aiki — muna da shekaru 12 a wannan kasuwanci.

Nema Kimantawa

Ku aika mana hoton, girma da salon sarko, za mu koma da kyauta mock-up, farashin abu guda ɗaya da ranar isarwa. Ko kuna buƙatar malkafin tunawa guda ɗaya ko jerin malkafin da aka zana na musamman ga ‘yan kasuwa masu sayarwa, MOQ 1 yawa ne kuma mock-up na farko baya kashe kuɗi.

Request a Quote — muna amsa da zane, ba da takardar amsa ta maimaitawa ba.